Factory Defaults - HP ProCurve 1810G Management And Configuration Manual

Diagnostics

Factory Defaults

Note
If you have downloaded a configuration file and want those setting to take affect after the next reboot,
be sure to clear the Save Configuration check box. Otherwise, the configuration file will be overwritten
and the switch will reboot with the current configuration instead of the downloaded configuration.
■
■
Factory Defaults
Two configuration images are kept in system memory: one image contains custom settings; the other
image contains the factory defaults. Use this page to restore all settings to the factory defaults page.
To access this page, click Diagnostics > Factory Defaults.
CAUTIO N
Backup the current configuration file prior to restoring the factory defaults configuration.
See
Figure 9-4. Factory Defaults Page
■
9-4
Select Save Configuration if you want the current configuration to be saved prior to the reboot.
Click Reboot Switch to reboot the switch. The current HTTP session is terminated.
"Backup Manager" on page 10-1
Click Reset Configuration to restore the system to the default settings. You can use the
Maintenance > Save Configuration page to ensure that the factory defaults remain in effect after
a reboot. Or, use the Maintenance > Reboot Switch page and ensure that the Save Configuration
check box is selected prior to rebooting.
for instructions.