Example-Creating A Management Vlan - HP ProCurve 1810G Management And Configuration Manual

Example—Creating a Management VLAN
A management VLAN can be created to restrict user access. Access restrictions can be applied to a set
of users capable of accessing the HP ProCurve 1810G switch software. Follow these steps to create a
management VLAN.
Note
■
■
1.
2.
Wait a few moments for the switch to configure the new management VLAN/port before attempting to
log in.
Prior to configuring a management VLAN/port, ensure that the port being configured is
connected to a network that is accessible through that port and management VLAN; otherwise,
you will lose connectivity instantly upon configuration.
If more than one port are configured as untagged VLAN members of management VLAN
(through the VLAN Participation / Tagging page), users can have management access through
all these ports irrespective of the configured management port
Use the VLAN Configuration page to create a VLAN ID for use as the management VLAN.
Display the Network Setup > Get Connected page and do the following:
• In the Management VLAN ID field, specify the VLAN ID created in
In the Management Port field, select the port you want to use as the management port.
•
Example—Creating a Management VLAN
Step 1.
Virtual LAN
7-5