HP ProCurve 1810G Management And Configuration Manual page 28

Status Pages
Clock
Field
Daylight Savings Time
Start Time settings /
End Time settings
Offset
For instructions on configuring the system time, see
"Time Zone" on page
2-12
Description
Daylight Savings Time
Shows whether Daylight Savings Time is enabled and the mode of operation:
• Disabled—No clock adjustment will be made for Daylight Savings Time.
• Recurring—The settings will be in effect for the upcoming period and subsequent years.
• Non-Recurring—The settings will be in effect for only one period (i.e., they will not carry
forward to subsequent years).
Shows the following to indicate when the change to Daylight Savings time occurs and when
it ends. The fields that display here depend on which Daylight Savings Mode is configured.
• Week—The number of weeks into the month when the change to/from Daylight Savings
Time occurs. (This field is available only when the Daylight Savings Time mode is set to
Recurring.)
• Day—The day of the week when the change to/from Daylight Savings Time occurs.
• Month—Set the month when the change to/from Daylight Savings time occurs.
• Hours—Set the hour of the day when the change to/from Daylight Savings Time occurs.
• Minutes—Set the minutes in the hour when the change to/from Daylight Savings Time
occurs.
The time amount of time in minutes to advance the clock during Daylight Savings Time.
3-4, and "Daylight Savings Time" on page
"Simple Network Time Protocol" on page
3-5.
3-3,