Dual Image - HP ProCurve 1810G Management And Configuration Manual

Status Pages

Dual Image

■
■
For instructions on configuring this feature and a description of these fields, see
page
Dual Image
The Dual Image status page displays the status of the two system images (image1 and image2). To
display this page, click Status > Dual Image in the navigation bar.
As shown in
image after a reboot.
Figure 2-8. Dual Image Status Page
Table 2-6. Dual Image Status Fields
Field
Active
Next-active
Image1/Image2 Version
Image1/Image2 Description
For instructions on configuring the active image, see
2-10
Click Clear to reset all counters to 0.
Click the Refresh link above the page to re-display the page with the latest status from the
switch.
4-6.
Figure 2-8, Image1 is the Current-active image and will continue to be the Current-active
Description
The currently active image name.
The next active image name. The Administrator can configure the image to take effect
the next time the system is booted. It may be a different than the currently active image
(for example, if the administrator configures the backup image to take effect upon the
next reboot).
The software version of the images.
The configured descriptions for the images.
"Dual Image Configuration" on page
"Loop Protection" on
10-9.