Time Zone - HP ProCurve 1810G Management And Configuration Manual

Network Setup

Time Zone

■
■
To view a summary of clock information, click Status > Clock in the navigation pane.
Time Zone
Use this page to configure your local time zone. The switch must be configured to acquire the time
from an SNTP server.
To display the Time Zone page, click Network Setup > Time Zone in the navigation pane.
Figure 3-3. Time Zone Page
Table 3-3. Time Zone Fields
Field
Time Zone
Acronym
■
■
To view a summary of clock and time zone information, click Status > Clock in the navigation pane.
3-4
Click Apply to save any changes for the current boot session; the changes take effect
immediately. Use the Maintenance > Save Configuration page to have the setting remain in effect
after a reboot.
Click the Refresh link above the page to re-display the page with current settings from the
switch.
Description
Select the time zone for your location.
Specify an acronym for the time zone.
Click Apply to save any the changes for the current boot session; the changes take effect
immediately. Use the Maintenance > Save Configuration page to have the setting remain in effect
after a reboot.
Click the Refresh link above the page to re-display the page with current settings from the
switch.