HP ProCurve 1810G Management And Configuration Manual page 20

Status Pages
Port Summary
Table 2-1. Port Summary Fields
Field
Interface
Physical Type
Port Status
AutoNeg Status
Link Speed
MTU
Interface
Received Packets w/o Error
Received Packets with Error
Broadcast Received
Packets
Transmitted Packets w/o
Errors
Transmitted Packets with
Errors
Collisions
Transmitted Pause Frames
Received Pause Frames
■
■
For instructions on configuring port settings, see
2-4
Description
Displays list of physical and logical interfaces supported or configured on a particular
platform.
Displays whether the port is operating in copper mode or fiber mode.
The physical status (Up or Down) of the port.
Displays whether Auto negotiation is enabled or disabled on the port.
The physical speed at which the port is operating.
The Maximum Transmission Unit (MTU), also referred to as Max Frame size acceptable
on the specified port.
Note: The following statistics are collected for both individual port and for trunks.
The list of physical and logical interfaces supported on that platform.
The packet count received on the port with out any packet errors.
The packet count received on the port with errors.
The packet count for Broadcast packets received on the port.
The packets transmitted out of that port with out any packet errors.
The number of packets transmitted out of the port with packet errors.
The count of collided packets.
(For ports only) The number of Ethernet pause frames transmitted.
(For ports only) The number of Ethernet pause frames received.
Click Clear to reset all statistics to their initial values.
Click the Refresh link above the page to re-display the page with the latest port information.
Port Summary
Port Statistics and Trunk Statistics
"Port Configuration" on page 4-1.