Green Features - HP ProCurve 1810G Management And Configuration Manual

Table 4-4. Flow Control Fields
Field Description
Enable Flow Control Select to enable flow control on the switch. Clear to disable the feature.
Click Apply to save any changes for the current boot session; the changes take effect
■
immediately. Use the Maintenance > Save Configuration page to have the settings remain in effect
after a reboot.

Green Features

ProCurve 1810G switch software allows user to enable or disable Green Mode. When enabled, LEDs
on the switch are turned off. In Green Mode, the switch consumes less power than in normal high-
performance mode.
To configure Green Mode, click Switching > Green Features in the navigation pane.
Figure 4-5. Green Features
Table 4-5. Green Mode Fields
Field Description
Green Mode Enable or disable Green Mode on the switch. When Green Mode is enabled, LEDs on the switch
are turned off. In addition, port transceivers that do not detect a link are placed in low-power mode.
Mode LED Time Specify the time in minutes that port LEDs illuminate if the LED Mode button is pressed while the
switch is in Green Mode.
Click Apply to save any changes for the current boot session; the changes take effect
■
immediately. Use the Maintenance > Save Configuration page to have the settings remain in effect
after a reboot.
Switching Pages
Green Features
4-5