Diagnostics; Ping Test - HP ProCurve 1810G Management And Configuration Manual

Diagnostics

Ping Test

Use the Ping Test page to determine whether another device on the network is reachable. Ping provides
a synchronous response when initiated.
To display the Ping Test page, click Diagnostics > Ping Test in the navigation pane. The following example
shows the output of the ping test.
Figure 9-1. Ping Test Page
Table 9-1. Ping Test Fields
Field Description
IP Address Specify the IP address of the host you want to reach.
Count Specify the number of packets to send. (Range 1 - 5 packets, Default = 1)
Interval Specify the delay between ping packets. (Range 1–60 seconds, Default = 3 seconds)
Size Specify the size of the ping packet to be sent. (Range 0–5120, Default = 0)
9
9-1