Saving Changes; User-Defined Fields; Web Applet - HP ProCurve 1810G Management And Configuration Manual

Getting Started
Getting Started With the Web Interface
CAUTIO N
Configuration changes take effect immediately, but some changes are not retained across a
power cycle (or reboot) unless the changes are saved to the system configuration file. See

"Saving Changes"

■
■
■
Saving Changes
When you click
retained after a reboot. To ensure changes to the system configuration file are saved so that they are
retained after a reboot:
1.
2.

User-Defined Fields

User-defined fields can contain 1–31 characters, unless otherwise noted on the configuration Web page. All characters may
be used except for the following (unless specifically noted for that feature):
\
/

Web Applet

The Web Applet, as shown in
representation of the switch and provides information regarding the status parameters of individual
ports. The Web Applet enables easy system configuration and Web-based navigation.
Figure 1-3. Web Applet
System LEDs
■
1-4
below.
Click Refresh to refresh the page with the latest information from the switch.
Click Support to access the HP ProCurve Web site (Internet access required).
Click Logout to end the current management session.
, changes are saved only for the current boot session. The changes will not be
Click Maintenance > Save Configuration in the Navigation pane.
On the Save page, click
< * |
>| ?
LED Mode
Port Configuration and Summary—You can point to any port to display the following
information about the port:
• Auto Negotiation Status
• Speed
Left-click a port to display its Port Configuration page, or right-click and select from the menu to
display its Port Configuration Page or the Port Summary page for all ports.
.
Figure 1-3, displays at the top of the every page. It is a graphic
Port Configuration and Summary
(Point, left-click, or right-click on any port for options)