Lldp Remote Device - HP ProCurve 1810G Management And Configuration Manual

Link Layer Discovery Protocol (LLPD)

LLDP Remote Device

LLDP Remote Device
Use the LLDP Remote Device page to view information about remote devices for which the switch has
received LLDP information. To display the LLDP Remote Device page, click LLDP > Remote Device in
the navigation pane.
As shown in the example configuration in
Figure 8-3. LLDP Remote Device Page
Table 8-3. LLDP Remote Device Fields
Field
Local Interface
Chassis ID
Port ID
Port Description
System Name
System Capabilities
Capabilities Enabled
System IP
■
8-4
Description
The port on the local system that received the LLDP data from the remote
system.
The chassis component associated with the remote system.
The physical address of the port on the remote device that sent the LLDP data.
The port description configured on the remote device. If the port description is not
configured, the field is blank.
The system description configured on the remote device. If the system
description is not configured, the field is blank.
The capabilities of on the remote device.
The capabilities on the remote device that are enabled.
The IP address of the remote device.
Click the Refresh link above the page to re-display the page with current settings from the
switch.
Figure 8-3, the remote device is connected to interface 3.