Update Manager - HP ProCurve 1810G Management And Configuration Manual

Maintenance Pages

Update Manager

Update Manager
Update Manager enables a new image or configuration file to be uploaded from the local system or
network to the switch. To access this page, click Maintenance > Update Manager in the navigation pane.
Update Manager displays different options depending on the transfer protocol, file or image type
selected for an update. In the example in
is being updated with the file named switchdrvr.stk from a TFTP server. For example, if the image1
file is being used as the currently-active image running on the switch, then the image2 file is the backup
file to be updated.
Figure 10-2. Update Manager Page
Table 10-2. Update Manager Fields
Field
Update Method
Browse for file
(HTTP upload only)
Server IP
(TFTP upload only)
File Name
(TFTP upload only)
10-4
Figure
Description
Select the protocol to use:
• HTTP—The file is downloaded using HTTP from a local or remote drive.
• TFTP—The file is downloaded using TFTP from a TFTP server operating on the system/
network.
If HTTP is used for the software update, click Browse to select the designated file.
Note: If the file name differs from the default name on the switch, the file will be renamed to the
default name when uploaded (see the Update Type field description).
If a TFTP download is performed, enter the IP address of the TFTP server.
If a TFTP download is performed, enter the name of the software update file on the TFTP server.
10-2, the inactive (or "Backup") image on the switch