Datalogic AccuLazr AL5010 Product Line Manual page 96

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Decode/DSP Counters
DSP Codes Count of the number of bar codes decoded, per laser, by the
DSP.
Scan Ints Number of scan interrupts detected by the DSP.
Queue Size Current size of the scan data queue within the DSP. This
value changes dynamically.
Num Cluster Current number of DRX clusters in use by the DSP. This
value changes dynamically.
Bad Scan Count of the number of scans in which the data contained
formatting errors.
Pipe Error Count of internal errors on the transfer of scan data from the
scan data buffer.
Full Scans Number of times a scan could not be added to the scan data
buffer because the maximum number of scans was exceeded.
Mem Full Number of times a scan could not be added to the scan data
buffer because the memory was full.
ScanTooLong Number of times a scan was skipped because it contained too
many transitions.
Max Clusters Number of times, the maximum number of DRX clusters was
exceeded.
ARM and DSP Restarts Counters
ARM Restarts Number of times the ARM processor has restarted. This
typically means the hardware watchdog timer expired causing
the ARM processor to restart.
DSP Restarts Number of times the DSP processor has been restarted.
Typically, this happens if the ARM suspects the DSP has
"locked up" for any reason.
Message Log View
The Message Log View contains various text messages that have been
logged by the reader software.
The messages contained in this log typically reflect significant events.
To open the Message Log View:
1. Click Message Log, or
2. Enter DISPMSGLOG in the command field. Click Send Command.
3. The message log is shown in the viewer.
4. Click Clear to empty the viewer and display another log. 0.