Datalogic AccuLazr AL5010 Product Line Manual page 160

Hide thumbs Also See for AccuLazr AL5010:
Table of Contents

Advertisement

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Units – Drop-down list allows the units of measure to be set as
either English or Metric.
Control Panel
Enable Control Panel Buttons – When enabled, select one of the
following modes from the drop-down list:
Options
• Use ! Button For Test Mode: Activate the test mode by
pressing the "!" button.
• Use ! Button to Learn Match Code: Unit operates in Test
Mode, but the last code read is also stored in the match
code table.
• Use ! Button for Sleep Mode: Holding the ! button down
for seven (7) seconds will put the AL5010 into sleep mode.
Username – Enter the username
Network
Access
Options
Password – Enter the password
Confirm Password – Re-enter the password to confirm and set
the new password.
NOTE: The "! Button" refers to the button on the
back of the AccuLazr bar code reader.

Advertisement

Table of Contents
loading

Table of Contents