Table of Contents
Advertisement
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
I/O 1 Configuration = Used as output
Selection
Definition
Custom Output
Used for applications involving custom software to select a
customized output option.
Always on while the reader is operating.
Life Light
Trigger Output
Echoes the status of the trigger signal.
Error Light
Active in the event of an error condition (see later section on
errors currently detected).
Active if all expected codes are read.
Good Read
Output
No-Read Output
Active if not all expected codes are read.
Active if any code matches the match code criteria.
Match Output
No Match Output
Active if no codes match the match code criteria (includes no-
reads).
Good Read and
Active if a code was read but did not match the match code
No Match Output
criteria.
Active if too many codes were read.
Multiple Output
Multiple or No-
Active if too many codes were read or a no-read occurred.
Read Output
Active Low/
Select Active Low or Active High from the drop-down list.
Active High
• Active Low: The trigger is active when the input signal is
low.
• Active High: The trigger is active when the input signal is
high.
Output Signal
Enter a duration in milliseconds for the output signal.
Duration (ms)
Advertisement
Table of Contents
