Table of Contents
Advertisement
NOTE: You can only "schedule" I/O message transfers to the AL5010 at a
fixed interval. The Connection Tab allows you to specify this interval. The
AL5010 will handle intervals down to 10 milliseconds. However, intervals this
small may affect the overall AL5010 performance.
After this module definition for the AL5010 has been completed, tags will be
created in the controller based on the name you specified for this AL5010 on
the properties page for the module. These tags will consist of the name
followed either by the letter 'C' (Configuration), the letter 'O' (Outputs) or the
letter 'I' (Inputs). These tags are based on the AL5010 assembly objects.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Advertisement
Table of Contents
