Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Modify Settings > Trigger
The trigger helps the reader identify when products with bar codes are
entering the scanning area. Use Modify Settings > Trigger Settings to set
the various trigger parameters.
Trigger Source
There are three options for trigger source:
Hardware Trigger
•
Software Trigger
•
Continuous Trigger
•
Since the trigger parameters vary based on trigger type selected, the trigger
parameter options have been defined within the context of the specific trigger
source.
See also: Modify Settings > Trigger in Appendix C.