Table of Contents
Advertisement
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Modify Settings > Stripping/Padding
For each symbology type (defined in Modify Settings > Bar Codes),
stripping and/or padding of the bar code data can be specified. This stripping
and padding is applied to the bar code before any message formatting.
NOTE: Character stripping is applied before character
padding.
To set the character stripping for a bar code:
1. Select the bar code from the Available Bar Codes drop-down list.
2. Click on the required character stripping option.
3. Proceed to character padding if required.
4. Click Update when finished.
To set the character padding for a bar code:
5. Select the bar code from the Available Bar Codes drop-down list.
6. Click on the required character padding option.
7. Make the necessary entry based on the padding option selected.
8. Click Update.
0.
See also: Modify Settings > Stripping/Padding in Appendix C.
Advertisement
Table of Contents
