Table of Contents
Advertisement
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Controller indicates a problem with a Client connection.
RED
indicates a Controller with incompatible settings tried to
in
itiate a Client connection.
I/O 1 through I/O
relay I/O lines.
Read
Read Quality – Graph 0-100) The large percentage bar maps
the values displayed on the reader bar graph. The graph
Performance
d
ynamic measure of "how well" the bar code was read.
Scans/Code – Indicates how many passes of the laser (scan
lin
es) contributed to the reading of the code.
Code Position – Indicates the bar code's position in the reader's
s
can line (from zero to 4095).
Code Quality (QQ) – Laser 1 / Laser 2 - Indicates th
q
uality) value for each laser that read the bar code.
Messages
Diagnostic messages from the reader are display
is
primarily information on each bar code read.
Use the buttons below the Messages area to start and stop
(f
reeze) the messages being displayed for better diagnostics.
To copy text, highlight the text and then perfo
P
aste the text into an external text program.
Box Information
Belt Speed (FPM) – Displays the belt speed in feet per minute.
Box Length (inch) – Displays the box length in inches.
The box length is influenced by
o
ption in the Tracking screen.
Example:
If the extend front is set to 2 and a 10 inch box is sent throu
th
e system, then the Box Length is reported as 12 inches
Code Position (inch) – Displays the code position on the box in
in
ches.
S
cans/Trigger – Displays the number of scans per trigger cycle.
Distance (in) – Displays the approx
scanner to the bar code in inches.
Message
Use the Message Monitor to view the messages being sent
Monitor
fr
om any of the reader host ports (either serial or network).
Select the communication port you want to
o
ption group below the message monitor.
Start Test Mode
Click Start Test Mode to put the scanner in timed test m
will then read any readable bar code place in its beam.
4 – Indicates the status of the programmable
rm a copy function.
the extend front or extend back
imate distance from the
monitor from the
ode. The scanner
to
is a
e QQ (code
ed here. This
gh
Advertisement
Table of Contents
