Chapter 5 Monitoring And Maintaining The Cisco Mgcp Ip Phone - Cisco MGCP IP Phone Administrator's Manual

Monitoring and Maintaining the
Cisco MGCP IP Phone
You can use Telnet to view information about your Cisco MGCP IP phone, to monitor the network, and
to maintain the phones in your network.
Only two Telnet sessions can be open at any time, and the Cisco MGCP IP phone cannot originate a
Note
Telnet session to another address.
The available commands are as follows:
Command
MGCP Phone> clear {arp | malloc | tcp-stats |
ethernet | ip}
Purpose
Clears the following depending on keywords used:
arp—Clears the Address Resolution Protocol (ARP) cache.
•
• malloc—Clears the memory allocation table.
tcp-stats—Clears the TCP statistics.
•
ethernet—Clears the network statistics.
•
• ip—Clears the IP statistics.
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
C H A P T E R
5
5-1