Datamax E-Class Mark III Professional Operator's Manual page 56

DISPLAYED ITEM
WIRELESS ETHERNET
IP DISCOVERY
USE STATIC
ADDRESSES
USE DHCP
USE BOOTP
STATIC IP
ADDRESS
STATIC SUBNET
MASK
STATIC
GATEWAY
BLUETOOTH
DISCOVERABLE
CONNECTABLE
BONDABLE
AUTHENTICATION
REQUIRED
ENCRYPTION
INACTIVE
DISCONNECT
TIME
POWER DOWN
TIME
GENERAL NETWORK
SNMP ENABLE
NO
YES
TELNET ENABLE
NO
YES
FTP SERVER
ENABLE
NO
YES
HTTP SERVER
ENABLE
NO
YES
LPD PRINT
ENABLE
NO
YES
TCP PRINT
ENABLE
NO
YES
NETCENTER
ENABLE
NO
YES
GRATUITOUS ARP
NETWORK REPORT
50
Controls the communications settings for the wireless Ethernet network interface, where:
Sets the address discovery method, where:
The stored static IP, Subnet Mask, and / or Gateway Address will be used.
The card broadcasts over the network using DHCP protocol to receive addresses from the
responsible server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway Address
are not allowed; and, if no server is found, the specified static value will be used. (Default Setting)

A server assigned IP address takes precedence over any static IP address
stored in the interface.
The card broadcasts over the network using BOOTP protocol to receive addresses from the
responsible server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway Address
are not allowed; and, if no server is found, the specified static value will be used. (Default Setting

A server assigned IP address takes precedence over any static IP address
stored in the interface.
Specifies the static IP Address of the interface in the standard octet format.
Specifies the static Subnet assigned to the interface, for example:255.255.255.000.
Specifies the Gateway Address the interface will use, for example:192.168.10.1
Controls the communications settings for the Bluetooth network interface, where:
Yes/No; Determines whether other Bluetooth devices in range can detect the printer.
Yes/No; Determines whether other Bluetooth devices in range can connect to the printer.
Yes/No; Determines whether other Bluetooth devices in range can create a "bondable" connection
with the printer
Yes/No; Determines whether passkey is required to the printer.
Yes/No; Determines whether encryption is used during data transfer to the printer.
(0-65535 in seconds); Default: 60
Set the amount of time (in seconds) in which the current connection will remain open when no
activity is present.
(0-65535 in seconds); Default: 60
Set the amount of time (in seconds) in which the Bluetooth module will remain on when no activity
is present.
Controls general communication parameters, where:
Sets SNMP
(Default Setting)
Enable/Disable Telnet protocol
(Default Setting)
Enable/Disable FTP protocol
(Default Setting)
Enable/Disable FTP protocol
(Default Setting)
Enable/Disable LPD protocol
(Default Setting)
Enable/Disable TCP protocol
(Default Setting)
Enable/Disable Netcenter compatibility
(Default Setting)
Sets time interval for ARP transmission packets, where:
(0-100 minutes); Default is 0
Print or view on screen the printers network information.
ITEM DESCRIPTION
Chapter 4 – Menu System
)