Datamax E-Class Mark III Professional Operator's Manual page 89

F. Download the generated files to the printer – one method is the DOS copy command:
G. Reset the printer by pressing and holding the CANCEL Key for approximately four seconds.
H. After resetting, verify operation by printing a Configuration Label (see Section 4.4). New language
information will be printed under SYSTEM INFORMATION / OPTIONAL LANGUAGES. (Also, the new
language will appear on the display as a menu item in SYSTEM SETTINGS / MENU LANGUAGE. These
are the only methods to determine a successful download.)
Enable the new language. Enter the menu system and go to SYSTEM SETTINGS / MENU LANGUAGE
and select the new language. Next select the desired font for the language. Save the changes when
prompted. (A reset will occur as font validation is performed.)
An error has occurred if the printer displays the new language selection, but all messages remain in
English. In this case, re-check your process or contact Datamax-O'Neil Technical Support (be ready to
provide the Common.xls and DPL download files created). Other error messages are also possible:
Menu Language Error Message
Please select the entire column(s) or the
desired language(s), by clicking on the
column letter(s)
Message text may not exceed MAX = xx
designated characters for this MID
I. Repeat Steps A – H using the filename misc.xls to translate printer option items. This will output
small20.ls.
Appendix D – Menu Language
copy small.ls lpt1: /b
After pressing the Generate DPL File(s) radio
button, the languages to convert were not
correctly selected.
The entered message exceeds the number of
characters specified in column C. You may not
modify this number.
Description
83