Changing The System Access Code - ASL INTERCOM VAR4 Operation Manual

4.4 4.4

Changing the System Access Code

Changing the System Access Code
The access code can only be changed if the user is logged onto the system with full access, i.e, as User 2. The access code can only be changed if the user is logged onto the system with full access, i.e, as User 2.
In order to change the access code proceed as follows. In order to change the access code proceed as follows.
1. 1. Select Configuration Access Change-Code. Select Configuration Access Change-Code.
Note: When logged on as User 1, this sub-menu is not displayed. Note: When logged on as User 1, this sub-menu is not displayed.
When logged on as User 2, this sub-menu is only displayed if changing of the access code has When logged on as User 2, this sub-menu is only displayed if changing of the access code has
been allowed through the front panel; see Section been allowed through the front panel; see Section
2. 2. Move to, and select the user whose access code will be changed. Move to, and select the user whose access code will be changed.
[User 1] User 2 [User 1] User 2
3. 3. Use the rotary encoder and arrow keys to enter the new access code: Use the rotary encoder and arrow keys to enter the new access code:
[9999] [9999]
4. 4. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
Note: On changing the access code, a warning message may be displayed, depending on the Note: On changing the access code, a warning message may be displayed, depending on the
password control settings, see in Section password control settings, see in Section
Reference to Configuration Tool Reference to Configuration Tool
VAR4 / VAR12 / VAR20 - Operation Manual
4.4
User 2 User 1
Is sue: 03 complete, approved
Page 22 of 308 Page 22 of 308
"5.9.4 Password Control "5.9.4 Password Control
"5.9.4 Password Control "5.9.4 Password Control
ed
Configuration". Configuration".
Configuration". Configuration".