Mute Input Priority Set-Up - ASL INTERCOM VAR4 Operation Manual

10.2 10.2

Mute Input Priority Set-up

Mute Input Priority Set-up
Note that the default priority is 00 in order to mute even fire microphones. It is possible to set a lower priority Note that the default priority is 00 in order to mute even fire microphones. It is possible to set a lower priority
to mute only DVAs, and/or any other inputs, as described in the following steps. The Mute input will mute any to mute only DVAs, and/or any other inputs, as described in the following steps. The Mute input will mute any
input of lower priority. input of lower priority.
1. 1. Select Configuration System Router Inputs Music/Mute Mute Pri. Select Configuration System Router Inputs Music/Mute Mute Pri.
From V4.1.0470 or later: From V4.1.0470 or later:
Configuration System Router Inputs Misc Mute Pri Configuration System Router Inputs Misc Mute Pri
2. 2. Move to, and scroll the output list until the required output is displayed in the left field: Move to, and scroll the output list until the required output is displayed in the left field:
[OUTPUT 01] Priority-00 [OUTPUT 01] Priority-00
Default value: Default value: output 1 name output 1 name
Outputs: Outputs: 4 output for VAR4 4 output for VAR4
12 output for VAR12 12 output for VAR12
20 output for VAR20 20 output for VAR20
Note: The output given above is the output 1 default name, however this may have been changed Note: The output given above is the output 1 default name, however this may have been changed
according to each site's configuration. according to each site's configuration.
3. 3. Move to, and scroll the Mute input priority list until the priority to be applied is displayed in the right field: Move to, and scroll the Mute input priority list until the priority to be applied is displayed in the right field:
OUTPUT 01 [Priority-00] OUTPUT 01 [Priority-00]
Default value: Default value: '00' '00'
Possible values: 00 to 19 (00 is the highest priority) Possible values: 00 to 19 (00 is the highest priority)
Care should be taken in ensuring that the Mute input has higher priorities than the inputs it Care should be taken in ensuring that the Mute input has higher priorities than the inputs it
!
!
is intended to mute. is intended to mute.
4. Repeat steps 2 to 3
7. When all outputs have had their correct priority assigned, save the changes by pressing the SELECT
key, or cancel by pressing the BACK key.
VAR4 / VAR12 / VAR20 - Operation Manual
to assign the priority to each output.
Is sue: 03 complete, approved oved
Page 161 of 308 Page 161 of 308