ASL INTERCOM VAR4 Operation Manual page 144

In order to modify an input class proceed as follows. In order to modify an input class proceed as follows.
1. 1. Select Configuration System Router Inputs DVA. Select Configuration System Router Inputs DVA.
2. 2. Scroll the DVA input list until the required DVA is displayed: Scroll the DVA input list until the required DVA is displayed:
[EVAC 01] [EVAC 01]
Default value: Default value: DVA input 1 DVA input 1
Possible DVAs: VAR4: Possible DVAs: VAR4:
VAR12: EVAC 01 to EVAC 04 (inputs 1 to 4, long DVA) VAR12: EVAC 01 to EVAC 04 (inputs 1 to 4, long DVA)
VAR20: EVAC 01 to EVAC 06 (inputs 1 to 6, long DVA) VAR20: EVAC 01 to EVAC 06 (inputs 1 to 6, long DVA)
Note: The DVA input names given above are the default names, however these may be changed Note: The DVA input names given above are the default names, however these may be changed
according to each site's configuration. according to each site's configuration.
3. 3. Move to, and select the Class menu item: Move to, and select the Class menu item:
Pri [Class] Gain Pri [Class] Gain
4. 4. Scroll the list until the required classification for the DVA input is displayed: Scroll the list until the required classification for the DVA input is displayed:
[High Priority Emergency] [High Priority Emergency]
• •
[Non Emergency] [Non Emergency]
The input source has a non-emergency priority, e.g. Paging Microphones and music. The input source has a non-emergency priority, e.g. Paging Microphones and music.
• •
[Low Priority Emergency] [Low Priority Emergency]
The input source has a low priority emergency, e.g. ALERT DVA. The input source has a low priority emergency, e.g. ALERT DVA.
• •
[High Priority Emergency] [High Priority Emergency]
The input source has a high priority emergency, e.g. EVACUATE DVA. The input source has a high priority emergency, e.g. EVACUATE DVA.
Long DVA #1 (EVAC 01) default value: Long DVA #1 (EVAC 01) default value:
Long DVA #2 (EVAC 02) default value: Long DVA #2 (EVAC 02) default value:
Long DVA #3 to #6 (EVAC 03 to EVAC 06) default value: Long DVA #3 to #6 (EVAC 03 to EVAC 06) default value:
Short DVA #1 to #6 (TEST 01 to TEST 06) default value: Short DVA #1 to #6 (TEST 01 to TEST 06) default value:
For correct indication of the emergency message For correct indication of the emergency message
!
!
to 'High Priority Emergency', and the ALERT DVA should be set to 'Low Priority to 'High Priority Emergency', and the ALERT DVA should be set to 'Low Priority
Emergency'. Emergency'.
5. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
VAR4 / VAR12 / VAR20 - Operation Manual
EVAC 01 to EVAC 02 (inputs 1 to 2, long DVA) EVAC 01 to EVAC 02 (inputs 1 to 2, long DVA)
TEST 01 to TEST 02 (inputs 3 to 4, short DVA) TEST 01 to TEST 02 (inputs 3 to 4, short DVA)
TEST 01 to TEST 04 (inputs 5 to 8, short DVA) TEST 01 to TEST 04 (inputs 5 to 8, short DVA)
TEST 01 to TEST 06 (inputs 6 to 12, short DVA) TEST 01 to TEST 06 (inputs 6 to 12, short DVA)
O/pGains O/pGains Name Name
Is sue: 03 complete, approved
Page 144 of 308 Page 144 of 308
'High Priority Emergency' 'High Priority Emergency'
'Low Priority Emergency' 'Low Priority Emergency'
'Non Emergency' 'Non Emergency'
'Non Emergency' 'Non Emergency'
status, status, the EVACUTE DVA should be set the EVACUTE DVA should be set
oved