ASL INTERCOM VAR4 Operation Manual page 121

11. Move to, and scroll the mode list until the 'Mode=Latched' mode is displayed in the left field:
[Mode=Latched] ResetButton --
When this mode is selected, the reset button list on the right side is scrollable for selection.
Other options available:
•
[Mode=Not Latched] ResetButton --
Configures the button for non-latching mode.
See Section "7.3.4.3.2 Configuring a DVA Routing Button for Non-latching
•
[Mode=Play Once]
Configures the button for 'Play Once' mode.
See Section "7.3.4.3.4 Configuring a DVA Routing Button for Play Once
Default value: 'Mode=Not Latched'
12. Move to, and scroll the button list until the required button to provide the reset is displayed in the right
field:
Mode= Latched [ResetButton -1]
Default value: 'ResetButton –1'
Reset button: 1 to 30
Note: A group of DVA Routing buttons may share a single reset button, or each button may have its
own dedicated reset.
13. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.
VAR4 / VAR12 / VAR20 - Operation Manual
Is sue: 03 complete, approved
Page 121 of 308
Mode".
Mode".