Product Specifications; Model Numbers; Ups Input - Eaton Power Xpert Plus 1 Installation And Operation Manual

Chapter 10
Figure
10.1

Model Numbers

10.2 Specifications
t
Power Xpert

Product Specifications

The UPS is housed in a free‐standing cabinet with safety shields behind the door and
front panels. The UPS is available in 50 or 60 Hz with various output power ratings.
Models
9395-550/450
Power Xpert 9395-550/500
Power Xpert 9395-550/550
The following sections detail the input, output, battery, and environmental,
specifications for the UPS.
10.2.1

UPS Input

Operating Input Voltage
Operating Input Frequency Range
Operating Input Current
Input Current Harmonic Content
Power Factor
Line Surges
Battery Voltage
Battery Charging Capacity
Battery Shunt Trip
9395 UPS (450–550 kVA) Installation and Operation Manual
Power Rating
450 kVA
500 kVA
550 kVA
480 Vac
50/60 Hz
See Table 3‐4 on page 3-9, Table 3‐5 on page 3-10, or Table 3‐6 on
page 3-11.
Reduced for Generator
Adjustable
5% THD at full load
Minimum 0.99
6 kV OC, 3 kA SC per ANSI 62.41 and IEC 801‐4
480 Vdc
Configurable per UPM at nominal line voltage:
Up to 120A with less than 85% load
Up to 80A with 100% load
48 Vdc
S
164201701 Rev 3 www.eaton.com/powerquality
Frequency
50/60 Hz
50/60 Hz
50/60 Hz
10-1