Single Upm Restart; Single Upm Shutdown - Eaton Power Xpert Plus 1 Installation And Operation Manual

10. Press the
11. Repeat Steps 4 through 10 selecting
12. If the UPS is a Plus 1 model, repeat Steps 4 through 10 selecting
13. Repeat Steps 2 through 12 for each UPS in the distributed bypass system.
Power is present inside the UPS cabinet.
7.4.18

Single UPM Shutdown

To shut down a single UPM:
1.
2.
3.
4.
5.
6.
7.
8.
9.
7.4.19

Single UPM Restart

To restart a single UPM from a shutdown state:
1.
2.
t
Power Xpert 9395 UPS (450–550 kVA) Installation and Operation Manual
pushbutton on the UPM 1 Command menu bar.
SELECT
The UPM status indicates SHUTDOWN
Logic power remains on.
down UPM 4.
Press the pushbutton on the main menu bar. The System Status
CONTROLS
screen is displayed.
On the System Status screen, select the
Command screen is displayed.
On the UPS Control Command screen, select the UPM to shutdown.
Press the pushbutton on the UPS Control Command menu bar. The
CONTROLS
UPM Control Command screen is displayed.
On the UPM Control Command screen, select
Press the pushbutton on the UPM Command menu bar.
SELECT
The UPM status indicates READY
open, and the power module remains on. The remaining UPMs supply the
critical load.
To turn off the power module, press the
Control Command menu bar. The UPM Control Command screen is displayed.
On the UPM Control Command screen, select
Press the pushbutton on the UPM Command menu bar.
SELECT
The UPM status indicates SHUTDOWN
remaining UPMs continue to supply the critical load.
Logic power remains on.
Press the pushbutton on the main menu bar. The System Status
CONTROLS
screen is displayed.
On the System Status screen, select the
Command screen screen is displayed.
UPS OPERATING INSTRUCTIONS
.
The power module is turned off.
to shut down UPM 2.
UPM 2
W A R N I N G
Command. The UPS Control
UPM
UPM OFF
.
The input, output, and battery contactors
pushbutton on the UPS
CONTROLS
UPM OFF
.
The power module is turned off. The
command. The UPS Control
UPM
S
164201701 Rev 3 www.eaton.com/powerquality
to shut
UPM 4
.
.
7-37