Feature Button Functions; Message Indicator Lamp - Inter-Tel 8600 User Manual

Feature Button Functions

The feature buttons are designed to automate some of the commonly used functions,
such as dialing an outside number. Each of these is described in the table below.
BUTTON
Press
Press the low or high end of the volume button
Press (International Hold Symbol)
Press
XFR XFR
Press
CNF CNF
like to add to the conference
Press
MSG MSG
Press
FWD FWD
Press unlit or lit
DND
In addition to the buttons identified in the preceding table, your endpoint has a Spe-
cial button (
need to press this button before you dial a feature code. Consult your system adminis-
trator if you have questions about how your system is configured.

Message Indicator Lamp

The Message Indicator lamp (located at the top, right corner of the endpoint) shows
the same indications as the
ever there is a waiting message.
NOTE:
By default, the message lamp is programmed to light when you receive a new
voice mail message. However, this lamp can be programmed for other functions. Check
with your system administrator if you are unsure what your endpoint's lamp is pro-
grammed to indicate.
4
IF YOU...
and dial the destination number
and dial the numbers you would
and dial the destination number
DND
). Depending on how your telephone system is configured, you may
button. The Message Indicator lamp flashes when-
MSG
YOU CAN...
Answer a call.
Adjust volume during a call.
Put a call on hold.
Transfer a call.
Place a conference call.
Leave or listen to a message.
Forward calls to the specified
number.
Enable/disable Do-Not-Disturb
mode.
®
Inter-Tel Model 8600 User Guide (ITP Mode)
PG.
19
42
22
24
23
29
26
38