If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to telephone record reports that the system will periodi-
There are three types of account codes:
Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
Forced account codes must be dialed before you can place an outside call.
Optional account codes can be entered at any time during a call.
Your system administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
Enter the optional account code. If the account code is not immediately
To set an account code for all calls placed from your endpoint:
it is disabled.
To disable the code:
If desired, you can screen calls that are transferred from voice mail. This allows you
to accept and/or refuse specific calls. Depending on the call screening transfer method
you select (see
When your mailbox is programmed for screened calls, you have the following options
when you receive a transfer:
Say "Accept" or press
Say "Replay" or press
Say "Voice Mail" or press
Say "Forward" or press
call to another extension.
Say "Refuse" or press
and then the account code. If the account code is not immediately
. This code will be used for all calls made from your endpoint until
47), calls from voice mail may be unannounced, announce only,
to accept the call.
to replay the announcement.
to send the call to voice mail.
and then enter the extension number to forward the
to refuse the call.
Model 8600 User Guide (ITP Mode)