Accessing Fax Messages - Inter-Tel 8600 User Manual

A F
CCESSING AX
NOTE:
By default, the message lamp lights when you receive a new voice mail mes-
sage. Although the lamp can be programmed for other functions, it cannot be pro-
grammed to indicate that you have received a new fax message.
When you access a fax message using option six on the main menu, E-Mail Reader
announces the fax message according to the envelope options that you selected (see
page 78). E-Mail Reader does not have the capability to read the text in a fax. You
can, however, save, delete, and forward a fax (to the fax number that you specify)
using the associated options.
To access fax messages and the associated options:
1. Access your mailbox as described on
Say "Facsimile" or press
2.
following:
• Say "New" or press
• Say "Saved" or press
After the fax envelope is played, you have the following options:
3.
• Say "Forward" or press
tination. Then say or enter the fax destination number. The system plays the
fax destination number. Select one of the following:
–
–
• Say "Previous" or press
• Say "Envelope" or press
page 78
• Say "Next" or press
• Say "Save" or press
• Say "Delete Message" or press
NOTE:
delete the message or "No" to cancel the request to delete the message.
Hang up.
4.
76
M
ESSAGES
to access your fax messages. Then select one of the
6
to listen to new messages.
1
to listen to saved messages.
3
to forward a copy of the message to another des-
3
Say "Yes" or press to verify the number. The system announces that
#
the fax is scheduled for delivery.
Say "No" or press to start over.
to listen to the previous message.
4
5
for programming instructions).
to listen to the next message.
6
to save the message.
7
You may be prompted to confirm deleting the message. Say "Yes" to
page 30.
to play the introductory message envelope (see
to delete the message.
9
®
Inter-Tel Model 8600 User Guide (ITP Mode)