Changing The Language; Returning To Default Operation - Inter-Tel 8600 User Manual

Changing the Language

When your telephone system is installed, the system administrator can choose two of
four different languages (American English, British English, Japanese, or Spanish) as
the primary and secondary languages. You can then change the toggle between the
primary and secondary languages. For example, if the system's primary language is
American English, and your endpoint is programmed for the primary language, all
prompts are played in American English (unless changed, as outlined below). If the
secondary language is Japanese, and your endpoint is programmed for the secondary
language, all prompts are played in Japanese.
NOTE:
You can only use the secondary language voice mail prompts if they are
loaded on the system. By default, all endpoints are set for the primary language. See
your system administrator to determine which languages are programmed for your tele-
phone system.
To change the assigned language for your endpoint:
Dial
3 0
as desired.

Returning to Default Operation

You can return your endpoint to default levels at any time. This feature returns vol-
umes to default levels; cancels DND, manual call forwarding, background music, and
queue requests; and restores handsfree mode, pages, hunt group calls, and system for-
warding all at once.
To return your endpoint to default:
Dial
3 9
NOTE:
See
44
to change between your system's primary and secondary languages,
1
.
4
page 42 for instructions on changing volume levels.
®
Inter-Tel Model 8600 User Guide (ITP Mode)