System Speed Dial - Inter-Tel 8600 User Manual

To store a number in a Speed-Dial location:
With the handset in the cradle, dial
1.
Dial the speed-dial location (0-9) you want to program.
2.
Enter the number to be stored at the location you selected in step 2
3.
NOTE:
includes an asterisk, pound, a hookflash (a quick hang up and release), or a pause,
press
four times for a pause. (Each pause or hookflash counts as one digit.)
Press
4.
NOTE:
To dial outside telephone numbers without first selecting an outgoing line, enter
the Outgoing Call access code (default is
To erase a number in a Speed-Dial location:
With the handset in the cradle, dial
1.
2. Enter the speed-dial location (0-9) you want to erase or press the associated Sta-
tion Speed-Dial button.
3. EITHER, program a new number for the location code.
OR, Press
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
If necessary, select an outgoing line. Dial
tion Speed-Dial location number (0-9).

System Speed Dial

Your system administrator can store several speed dial numbers in the system speed
dial locations. Depending on the size of your system, you can access up to 1000 or up
to 5000 system speed dial locations, if they have been programmed.
To dial System Speed-Dial numbers:
Dial
1.
3
Dial the location code (000-999 or 0000-4999) for the desired number.
2.
Press
3.
52
(You cannot use hyphens or colons in the number.) If your number
once for an asterisk, twice for a pound, three times for a hookflash, or
to save the number.
#
to exit.
#
.
8 1
to dial the number.
#
.
3 3
8
) before the outside telephone number.
8
.
3 8 3
and then enter the desired Sta-
3 8 2
®
Inter-Tel Model 8600 User Guide (ITP Mode)