Reading Rack Installation Guide - Landice L Series Diagnostic And Service Manual

READING RACK INSTALLATION GUIDE

1. Begin by completely assembling the treadmill per the
instructions in owners manual.
2. Place upright on bed per main assembly instructions.
3. Check that the membrane is seated correctly, it may have
shifted in shipping.
Do not install plastic end caps on treadmill yet.
4.
Step 5
Step 6
Step 7
5. Remove the two screws
on the back of the control
panel using 5/32 allen
wrench.
6. Place the reading rack in
position on the back of the
control panel. Be sure
that the front edge of the
reading rack overlaps the
display panel.
7. If working alone, hold
reading rack in correct
position and insert screw
on one side and tighten
fully. Insert and tighten
second screw. Verify
proper alignment per step
3. If working with a
second person, one
should hold the rack and
maintain proper alignment
per step 3, while the other
person attaches reading
rack with screws provided.
8. Place plastic end caps on
treadmill.
Test.
9.
25