59
SLIPCOAT LUBRICANT
Recommended Treadbelt lubricant for Landice Commercial Treadmills
SPEED SENSOR
Landice uses a magnetic speed sensor to receive accurate speed readings. Readings are taken directly
from the flywheel on the motor and sent to the Relay Board or SCR. Distance between the sensor and the
flywheel is critical but the sensor is unaffected by dirt or dust build-up (unlike optical sensors).
TAKE UP ROLLER
This is the Roller at the rear of the treadmill. It completes the loop for Treadbelt movement and allows
tracking and tension adjustment of Treadbelt.
TREADBELT
This is the surface the user walks on. It rides over the deck and rollers.
UPPER DISPLAY BOARD
This controls information from the Membrane panel and Face Plate. It then transmits it to the relay board
on Home models and the SCR on Club or LTD models.
UPRIGHTS
One on either side, they house the wire harness, the upper display, the cross member and the handrails.
UPPER WIRE HARNESS
Transmits data from lower electronics to upper electronics.
VFX SYSTEM
Shock-absorbing Deck. Consists of wood Deck, VFX Deck Post, Deck Spacer, Deck Load Washer, Deck
Felt Washer, and Deck Impact Absorber.