Road Runner Diagnostic Addendum; Software Version Display; Reboot Display; General Diagnostics - Landice L Series Diagnostic And Service Manual

ROAD RUNNER DIAGNOSTIC ADDENDUM

The following information should be used IN ADDITION TO standard PWM diagnostic information
when diagnosing the Road Runner.

Software version display:

-Hold elevation lever in UP position and turn key from OFF to PAUSE. Version is displayed in
main window.

Reboot display:

-Hold elevation lever in the DOWN position and turn key from OFF to PAUSE. Display reads
BOOTING and user weight and user program are restored to factory defaults.

General Diagnostics:

-Hold speed lever in the SLOW position and turn key from OFF to PAUSE. All LED's light up while
the microprocessor performs a self-check. Any error codes (in the format of "Err ##") indicate an
upper board failure.
-Then you can begin the switch test. Activating the following switches displays a corresponding
error code:
BUTTON/DIAL/LEVER/KEY
Off
PAUSE
RUN
Button 1 (Time)
Button 2 (Distance)
Button 3 (Calories)
Button 4 (Pace)
Button 5 (Pulse)
Scan
Program
CD/Track (clockwise)
CD/Track (counter clockwise)
Volume (clockwise)
Volume (counterclockwise)
Grade UP
Grade DOWN
Speed FASTER
Speed SLOWER
Remove Safety Key
DISPLAY
Turns unit off
PAUSE
RUN
1
2
3
4
5
6
7
TRUP
TRDN
VOUP
VODN
GRUP
GRDN
SPUP
SPDN
SAFE
114