Appendix A: Medrail Installation (L8-L9) - Landice Pro Sports Trainer Quick User Manual

STEP 1
Insert the side rail into the upper
rail clamp and tighten the bolt
using a 1/2" socket.
(Do not over-tighten.)
STEP 4
Use a 3/16" allen wrench to tighten
the rail clamp bolts.
15

Appendix A: Medrail Installation (L8-L9)

Fit the side rail to the bottom rail
clamp.
Line up the upright leg side covers
and firmly snap them into place.
STEP 2
STEP 5
STEP 3
Use a soft mallet to firmly set the
rails inside the clamp.
STEP 6
Place the plastic endcaps on the
top corners of the control panel.
Use the two small Phillips head
screws included to secure the
endcaps.
(Return to step 9 in assembly
instructions)