Instructions For Rebooting Executive Trainer Software; Executive Trainers With Version 2.0 Software Or Older (Circa 12/2001); Executive Trainers With Version 2.1 Software And After (After 12/2001) - Landice L Series Diagnostic And Service Manual

Instructions for Rebooting Executive Trainer Software

Executive Trainers with Version 2.0 Software or older (circa 12/2001).

While the treadmill is off, you must hold down three (3) buttons simultaneously:
1. PREV
2. The third circular gray button down on the left side of the LCD screen.
3. START
Release the buttons after you see "Booting" show on the LCD screen.
This will reset the on board computer and all saved programs will be lost.

Executive Trainers with Version 2.1 Software and after (after 12/2001).

Follow the same procedure listed above but replace with these three buttons.
1. DOWN
2. PAUSE
3. START
97