Safety Shutdown / Over Speed; Safety Shutdown / Replace Safety Key - Landice L Series Diagnostic And Service Manual

Diagnostic Mode: you must press the OK button in order to proceed with troubleshooting the
elevation system failure.
Error Code: SAFETY SHUTDOWN / Over Speed
Meaning: The actual belt speed is exceeding the user's set speed.
Example: User sets speed to 1.0mph, the actual belt speed registers 2.0mph.
The treadmill will shut down and display an error in both upper displays.
Diagnostics: Refer to diagnostic guide and proceed with checking the speed calibration.
Error Code: SAFETY SHUTDOWN / Replace Safety Key
Meaning: The display board does not sense the presence of the safety key.
Diagnostics: Make sure the safety key is installed in the proper location.
This screen will be displayed
in diagnostic mode after OK
button is pressed.
OS will appear in the two-digit
speed window
96