Tire And Wheel Inspection - Yamaha CE50T Service Manual

I INSP I (i_ FRONT AND REAR BRAKE LNNING INSPECTION/ l
ADJ
TIRE AND WHEEL iNSPECTION
[] _. FRONT AND REAR BRAKE LINING
) 1. Activate the brake lever.
2. Inspect:
-_; ®Wear indicator (_
Indicator at wear limit line (_Replace
brake shoes.
!
_; TiRE AND WHEEL INSPECTION
1. Measure:
®Air pressure
Out of specification-_Adjust.
Cold tire pressure
Front 125 kPa (1.25 kg/crn 2, 18 psi)
Rear 225 kPa (2.25 kg/crn 2, 32 psi)
Proper loading of your scooter is important
for the handling, braking, and other perfor-
mance and safety characteristics of your
scooter. Do not carry loosely packed items
that can shift. Securely pack your heaviest
items close to the center of the scooter, and
destribute the weight evenly from side to
side. And check the condition and pressure
of your tires. NEVER OVERLOAD YOUR
SCOOTER. Make sure the total weight to the
cargo, rider, passenger, and accessories (fair-
ing, saddlebags, etc. if approved for this
model) does not exceed the maximum load
of the scooter. Operation of an overloaded
scooter could cause tire damage, an acci-
dent, or even injury.
2-19