Yamaha CE50T Service Manual page 147

ELECTRICALSTARTING SYSTEM IELEC ]
Front and rear brake switches
conduct check: No
1. Disconnect brake switch leads. Continuity _ I Replace front and/or rear brake
I
2. Set pocket Tester'(YU-03112) selector to switch.
"_ x 1" position.
3. Connect teser leads to brake switch leads
(Brown lead, Green/Yellow lead).
Tester (+) lead -*Brown lead
Tester (-) lead-*Green/Yellow lead
4. Apply front or rear brake.
TI ,
..... .-1 I
...... J
Continuity
Starter relay conduct check: No
1. Remove starter relay. Continuity
2. Connect 12V battery to starter relay ter-minals as shows. _! Replace starter relay" l
NOTE:
Use full charge battery.
3. Set Pocket Tester (YU-03112) selector to
"_ × 1" position.
4. Connect tester leads to starter relay ter- 7
minals as shows.
o
_
Continuity
6-10