Tire Pressure Check/Spokes Inspection/Wheel Inspection - Yamaha YZ250(P)/LC Owner's Service Manual

TIRE PRESSURE CHECK/SPOKES INSPECTION AND
TIGHTENING/WHEEL INSPECTION
EC36Q001
TIRE PRESSURE CHECK
1. Measure:
9
Tire pressure
Out of specification ¡ Adjust.
Standard tire pressure:
100 kPa (1.0 kgf/cm
NOTE:
9
Check the tire while it is cold.
9
Loose bead stoppers allow the tire to slip off its
position on the rim when the tire pressure is
low.
9
A tilted tire valve stem indicates that the tire
slips off its position on the rim.
9
If the tire valve stem is found tilted, the tire is
considered to be slipping off its position.
Correct the tire position.
EC36S002
SPOKES INSPECTION AND TIGHTENING
1. Inspect:
9
Spokes 1
Bend/Damage ¡ Replace.
Loose spoke ¡ Retighten.
2. Tighten:
9
Spokes
NOTE:
Be sure to retighten these spokes before and af-
ter break-in. After a practice or a race check
spokes for looseness.
EC36T000
WHEEL INSPECTION
1. Inspect:
9
Wheel runout
Elevate the wheel and turn it.
Abnormal runout ¡ Replace.
3-34
INSP
ADJ
2
, 15 psi)
3 Nm (0.3 m•kg, 2.2 ft•lb)