Yamaha CE50T Service Manual page 132

CHAS ® 1
FRONT FORK AND STEERING
10. Install:
=Rear brake lever assembly (:_
11. Apply:
oLithium_soap base grease
To throttle cable end and handlebar right
_-_,/-_ i 12. Install:
=Throttle grip (_)
_L__. _( ___ _ =Throttle cable (2_)
• Bracket _)
=Front brake lever assembly (_)
. =Handlebar switch (Right) (_
_, 13. Install:
=Front brake cable (_)
, =Rear brake cable (_
NOTE:
/
_s___/
Apply lithium-soap base grease onto the cable end
pivot.
14. Install:
=Handlebar covers (Front and rear)
®Speedometer cable
,,Front panel
®Front fender
Refer to "CHAPTER 2 -- FRONT FENDER,
FRONT PANEL AND FOOTREST BOARD"
and "HANDLEBAR COVERS" section.
15. Adjust:
®Front and rear brake lever free play
-,Throttle cable free play
Refer to "CHAPTER 2" section.
5-19