Installation - Yamaha CE50T Service Manual

[cA. 41 .EEO VALVE
J ]
r
2. Measure:
®Valve stopper height (~:
Out of specification-,Adjust
Replace valve stopper.
stopper/
! ~ Valve Stopper Height (~: ]
3.0-3.4 mm (0.12-0.13 in)
NOTE:
If it is 0.4 mm (0.016 in) more or less than
specified, replace the valve stopper.
®
3. Measure:
®Reed valve clearance (~)
Out of specification-* Replace reed valve.
~
Reed Valve Clearance (~: ]
Less than 0.2 mm (0.008 in)
iNSTALLATION
When installing the reed valve assembly, reverse
the removal procedure. Note the following points.
1. Install:
oGasket (New)
2. Tighten:
®Reed valve securing bolts
~ 9 Nm (0.9 m,kg, 6.5 ft,lb) ]
NOTE:
Tighten each bolt gradually to avoid warping.
4-13