Yamaha CE50T Service Manual page 86

I ENG
ENGINE ASSENIBLY AND ADJUSTMENT E
7. Install:
ePrimary fixed sheave (_
®One-way clutch (_)
• Conical spring washer @
oNut
_ ::_ -- _;_ 8. Tighten:
®Nut (primary sheave) (_
30 Nm (3.0 m,kg, 22 ft,lb)
NOTE:
When tightening the nut (primary sheave), hold
the C.D.I. magneto using Flywheel Holding Tool
(YU-01235).
9. install:
oFan (_
[_ Screw (Fan): ] ii_ 8 Nm (0.8 m-kg, 5.8 ft-lb)
10. Install:
®Dowel pins
oCrankcase cover (Left)
Screw (Crankcase Cover): ]
8 Nm (0.8 m,kg, 5.8 ft,lb)
3-41