Spark Plug Inspection - Yamaha CE50T Service Manual

FUSE iNSPECTION/SPARK PLUG iNSPECTiON
ADJ
2. Inspect:
e Fuse C)
Defective--* Replace.
Blown fuse procedure steps:
=Turn off ignition and the circuit.
=Install a new fuse of proper amperage.
=Turn on switches to verify operation of elec-
trical device.
®If fuse blows immediately again, check circuit
in question.
Do not use fuses of higher amperage rating
than recommended. Extensive electrical
system damage and fire could result from
substitution of a fuse of impcoper amperage:
Description Amperage Quantity
Main 7A 1
SPARK PLUG INSPECTION
1. Remove:
i =Cover @
_i_:_- =Spark plug,
0 H_
" --?: i
2. Inspect:
=Electrode _)
Wear/Damage--, Replace.
=Insulator (_
Abnormal Color_ Replace.
"
@ @ Standard Spark Plug:
BPR6HS (N.G.K.)
2-24