Inspection - Yamaha CE50T Service Manual

Ic.AsI .EA. w.EEL Le
INSPECTION
1. Inspect:
=Wheel
Cracks/Bends/Warpage-_ Replace.
2. Measure:
=Wheel runout
Out of specification_Replace.
_ Runout Limit:
...... Radial 2.0 mm 10.08 in)
Lateral 2.0 mm (0.08 in)
3. Inspect:
r/ = Brake shoes
Glazed parts_Sand with coarse sandpaper.
NOTE:
After using the sand paper, clean of the polished
_ particles with cloth.
4. Measure:
=Brake shoe thickness (_
Out of specification-* Replace.
Brake Shoe Thickness:
S.T.D.: 3.0 mm (0.12 in)
Limit: 2.0 mm (0.08 in)
5. Inspect:
=Brake drum inner surface
Oil/Scratches_ Remove.
Use a rag soaked in lacquer
Oil
thinner or solvent.
Use an emery cloth
Scratches
(lightly and evenly polishing).
5-9