Headlight Beam Adjustment; Ignition Timing - Yamaha CE50T Service Manual

I INSP
SPARK PLUG INSPECTION/
HEADLIGHT BEAM ADJUSTMENT/IGNITION TIMING
3. Measure:
ePlug gap (~
Out of specification--* Regap.
Use a Wire Gauge or Feeler Gauge.
I ~ Spark Plug Gap (~: ]
0 . 9 - 1 . 0 m m (0.035-0.039
in)
4. Clean the plug with a spark plug cleaner if
necessary.
5. Tighten:
Before installing a spark plug, clean the gasket
and plug surfaces.
NOTE:
Finger,tighten the spark plug before torquing to
specification.
Spark Plug:
20 Nm (2.0 m-kg, 14 ft.ib)
H E A D L I G H T B E A M A D J U S T M E N T
1. Adjust:
• Headlight (Vertically)
Vertical adjustment
Higher Loosen the adjusters (~)
Lower Tighten the adjusters (~)
• Headlight (Horizontal)
Horizontal adjustment
Loosen the adjuster (~) or tighten
Right the adjuster (~)
Loosen the adjuster (~) or tighten
Left
the adjuster (~)
IGNITION T I M I N G
Adjustment free.
2-25