Assembly (Brake Shoe Plate - Yamaha CE50T Service Manual

m
.4 _ F.o°T w.EE. IC.AS !
7. Inspect:
oBrake drum inner surface
Oil/Scratches-* Remove.
Use a rag soaked in lacquer
Oil
thinner or solvent.
Use an emery cloth
Scratches
(lightly and evenly polishing).
8. Measure:
®Brake drum inside diameter (_)
Out of specification-* Replace.
[_ Brake Drum Wear Limit: ]
80.5 mm (3.17 in)
ASSEMBLY (BRAKE SHOE PLATE)
When assembling the brake shoe plate, reverse
_ _ili the disassembly procedure.
_i_i _,?_ _ Note the following points.
/ 1. Apply:
_ oLithium-soap base grease -....... , (to speedometer driven gear)
©©
2. Apply:
=Lithium-soap base grease
(to speedometer drive gear)
3. Install:
®Dust seal (New)
NOTE:
Install the dust seal with their manufacturer's
marks or numbers facing outward.
5-4