Starter Clutch And Gears - Yamaha CE50T Service Manual

5. Install:
®Clutch securing nut
Use Clutch Spring Holder (_) (YS-28891).
_z,_,_._ ......... 6. Tighten:
oCtutch securing nut
Use Sheave Holder (_ (YS-01880) and
Wrench (41 mm).
[_ 50 Nm (5.0 m,kg, 36 ft°lb)
V-BELT
1. Inspect:
oV-belt
Crack/Wear-_ Replace.
NOTE:
Replace the V-belt smeared with a lot of oil or
grease.
2. Measure:
oV-belt width (_
Out of specification_Replace.
_ V-Belt Width:
15.0 mm 10.59 in)
/
a
I <Wear Limit>:
13.5 mm (0.53 in)
STARTER CLUTCH AND GEARS
1. Inspect:
-Starter clutch
Push the dowel pin to arrow direction.
Unsmooth operation-_Replacce starter
clutch assembly.
3-25