Overwrite Setting For The Recording Areas; Setting Series Recording - Sanyo DSR-3716 Instruction Manual

Digital video recorder with multiplexer function
Hide thumbs Also See for DSR-3716:
Table of Contents

Advertisement

Recording settings
Overwrite setting for the recording
C-1
areas
1
Display the <RECORDING CONDITIONS SET> screen as
explained in "Displaying the recording settings screen"
(P39).
MENU
(S)
(J)
2
Turn the J-dial to select "OVERWRITE" for the normal or
the alarm recording area, and then turn the S-dial
clockwise.
3
Turn the J-dial, select "OFF", and turn the S-dial
clockwise.
The "REMAINING DISK WARNING" changes from "**" to
"1%", and disk overwrite is prohibited.
If the available capacity in the normal or alarm recording
area drops below 1%, the corresponding FULL indicator on
the front panel of the DVR will start blinking.
(S)
(J)
4
Changing the "REMAINING DISK WARNING" level
1 Turn the J-dial to select "REMAINING DISK
WARNING", and then turn the S-dial clockwise.
2 Turn the J-dial to select remaining level (example:
5%), and then turn the S-dial clockwise.
The cursor moves to "SERIES RECORDING".
Selections: 1%, 2%, ... 9%, 10%
5
Press the EXIT/OSD button to end the setting
procedure.
EXIT/OSD
47
How to set
<MAIN MENU>
2.RECORD SET
<RECORD SET>
3.RECORDING CONDITIONS SET
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE
: ON
ALARM RECORDING AREA
OVERWRITE
: ON
RECORDING DISK WARNING
: **
SERIES RECORDING
: ON
AUTO DELETE
: OFF
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE
: OFF
ALARM RECORDING AREA
OVERWRITE
: OFF
REMAINING DISK WARNING
: 1%
SERIES RECORDING
: ON
AUTO DELETE
: OFF
C-2

Setting series recording

If multiple DVR units are connected, recording can be
automatically continued on the next DVR when the recording
area of the first one becomes full.
1
Connect the SERIES OUT terminal of the CONTROL
terminal block on the rear panel of the first DVR to the
SERIES IN terminal of the next DVR.
SERIES IN
(First DVR unit)
(Second DVR unit)
(Third DVR unit)
• Use cables no longer than 3m between the DVR units for
serial connection.
• Connect the MIC terminal and the AUDIO terminal as
shown below.
SERIES OUT
(Fourth DVR
and more)
Microphone (sold separately)
Amplifier (sold separately)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-3709Dsr-3716paDsr-3709pa

Table of Contents